La Rivista "Idee Per La Tua Casa" Online Si Trovare Idee E Soluzioni Originali, Pianificazione E Progettazione Della Vostra Casa Interno Del Progetto

Stucco Decapet Technique

Stucco Decapet Technique

Il decapet è una tecnica francese di invecchiamento e usura delle parti.

Ne esistono diverse versioni, in bianco o colorate; qui ne mostreremo uno.

materiale:

  • Pezzo in legno o MDF
  • Vernice acrilica Decorfix in acrilico nei colori della pelle color avorio, ocra e giallo
  • Cerotto acrilico Corfix (può anche essere massa)
  • Pennello per tigre piatto n. 181/12
  • Brush Type Tiger Brush No. 572 / ½
  • Vernice acrilica bianca PVA
  • Contenitore per la miscelazione
  • Pettine o forchetta per produrre texture
  • Corfix bitume Corfix
  • Latte di termalifera
  • Carta vetrata gialla G 125
  • Carta vetrata nera A220

Base e massa acrilica in decapet

Sand il pezzo prima per rimuovere le imperfezioni.

Rimuovere la polvere con un panno morbido e asciutto.

Stucco Decapet Technique: stucco


Creare uno strato base di vernice PVA bianca sull'intero pezzo.

Nota: Poiché l'oggetto di questo articolo è un piccolo pezzo, utilizziamo un pennello largo, ma se si utilizza questa tecnica su un mobile, ad esempio un armadietto, si consiglia di utilizzare un pennello.

Stucco Decapet Technique: stucco


Di solito, nel decapaggio si usa l'impasto, ma si può usare anche l'intonaco acrilico, che è un po 'più economico.

In un contenitore, mescolare vernice bianca con gesso acrilico; volendo, è possibile aggiungere una piccola colla bianca per dare più consistenza all'impasto.

Stucco Decapet Technique: technique

Con una spatola o il cucchiaio che hai usato per mescolare, metti un po 'della miscela sul pezzo e stendi con un pennello del tipo di pennello.

Dipingi lungo la scatola, cercando di produrre una texture.

Se è un pezzo di legno, fatti nella direzione delle vene di questo.

Texture per il decapping in mdf

Stucco Decapet Technique: decapet

Utilizzare un pettine o una forchetta per produrre una consistenza rustica sull'intonaco acrilico o sull'impasto.

Molte persone preferiscono una spazzola d'acciaio.

Lascia asciugare.

Stucco Decapet Technique: technique

Pulire con un panno morbido per rimuovere piccoli grumi e imperfezioni e pulire con un panno asciutto.

Applicazione dello stencil come elemento decorativo

Stucco Decapet Technique: acrilica

Posizionare lo stencil sul coperchio dell'alloggiamento.

Stucco Decapet Technique: acrilica

Applicare la miscela di gesso acrilico e PVA sullo stencil e livellare con una spatola.

Rimuovi lo stencil.

Stucco Decapet Technique: technique

Se per qualche motivo l'intonaco non forma l'immagine giusta (la massa può essere molto morbida), rimuovere con la spatola, pulire e applicare nuovamente.

Lasciare asciugare leggermente l'intonaco e applicare lo stencil anche sui lati della scatola.

Stucco Decapet Technique: bitume

Se lo si desidera, combinare più di uno stencil per rendere l'applicazione più interessante.

Una volta completamente asciutto, pulire la carta vetrata nera più morbida solo per rimuovere la massa in eccesso e le imperfezioni minori.

Applicazione del 2° colore nel decapê

Possiamo lasciare il sottaceto bianco, ma un colore dà sempre più grazia al pezzo, vero?

Stucco Decapet Technique: decapet

Qui, mescoliamo la vernice acrilica color avorio con una piccola quantità di pelle gialla (1/4 della quantità di vernice color avorio usata) per produrre una tonalità gialla leggermente invecchiata.

Strofinare la vernice nella direzione della texture e lasciare asciugare.

Pittura di cartone interna

Stucco Decapet Technique: acrilica

L'interno, che non è stato strutturato, è stato dipinto con una tonalità leggermente più scura, ma è anche possibile rivestirlo con carta regalo.

Qualunque sia l'opzione, scegli sempre un colore che corrisponda al dipinto esterno del pezzo ma che faccia contrasto, perché se sono entrambi nello stesso tono sarà molto noioso.

Come invecchiare il pezzo con bitume d'acqua

Infine, il nostro vecchio compagno di vecchiaia, il signor bitume.
Ma, a differenza del bitume tradizionalmente usato, questo è un bitume dell'acqua.
Poiché è solubile in acqua, è più facile rimuovere l'eccesso e pulire i pennelli utilizzati nel processo.

Stucco Decapet Technique: decapet

Per renderlo più fluido e facile da applicare, mescolare con una piccola porzione (1/4 per porzione bitume) di liquido termolacca.

Passa la miscela su un lato per volta, facendo attenzione che entri in tutti i solchi e le parti della trama.

Stucco Decapet Technique: decapet

Rimuovere immediatamente l'eccesso con un panno morbido.

La scatola è pronta. Guarda come i rilievi sono diventati più prominenti dopo l'applicazione del bitume.

Stucco Decapet Technique: stucco

Nota: la tecnica di decapaggio è molto apprezzata nei mobili.

Se decidi di usarlo per cambiare l'aspetto di un mobile, ad esempio un comò, ti consigliamo di usare un pennello invece del pennello indicato qui.

FAQ - 💬

❓ How do you knock down stucco texture?

👉 0:097:13Learn how to apply Knockdown Stucco Dash FinishStart of suggested clipEnd of suggested clipThis is what we call a knock down - what is a knock down - well here's a - brush. It's in water andMoreThis is what we call a knock down - what is a knock down - well here's a - brush. It's in water and here's mud. We - it then we take a try and we knock it down. And that gives it the texture.

❓ How do you do a skip trowel finish on stucco?

👉 0:326:59Learn to trowel on a stucco base coat then a skip trowel finishStart of suggested clipEnd of suggested clipOkay your hard rubber floated with hard rubber float two coats. Because we want to open it allow itMoreOkay your hard rubber floated with hard rubber float two coats. Because we want to open it allow it to breathe. Because I'm looking at their finish here and it's kind of tight.

❓ What are the three steps of stucco?

👉 Three coat is the original stucco process, consisting of paper and wire, a scratch coat, a brown coat, and a finish, or “top” coat. In industry terms — lath, scratch and brown.

❓ Does stucco need an air gap?

👉 Stucco and thin stone with continuous rigid insulation should take cues from EIFS—having an air gap to drain behind the rigid insulation is important, as moisture could potentially migrate there from the interior (as vapor) or from the exterior (in liquid or vapor form).

❓ How do you smooth out a rough stucco?

👉 Steps for Converting Rough Stucco into Smooth Stucco

  1. Smooth the Surface: Using a high grit sanding paper, sand down the rough stucco to as smooth as possible. ...
  2. Wash off the Surface: Wash off the surface of the stucco wall using a hosepipe. ...
  3. Apply the Primer: ...
  4. Apply the Smoothing Filler : ...
  5. Sand the Wall: ...
  6. Finishing:

❓ What is knock down stucco?

👉 Knock down is a sprayed on product that is applied over drywall typically. It is called Knock Down because after the walls are sprayed the installer takes a trowel and smooths over the surface to "knockdown" the stucco effect. You are left with a very noticeable, but more flat "nibs" vs. a full stucco or plaster wall.

❓ What is a Santa Barbara stucco finish?

👉 Merlex Santa Barbara Finish Exterior Stucco is a premium quality portland cement based color coat finish material designed to achieve a smoother texture reminiscent of the many historical buildings in the Santa Barbara area.

❓ What are the different types of stucco finishes?

👉 When it comes to the different types of stucco finishes, there are seven main styles you should know:

  • Dash.
  • Cat Face.
  • Sand.
  • Spanish Lace.
  • Santa Barbara.
  • Worm.
  • Smooth.

❓ How long do you wait between coats of stucco?

👉 Moist-cure the brown coat for 2 days, and then air cure for 5 additional days before applying the finish coat. The finish coat is the third or top layer.

❓ How thick should a 3 layer stucco coat be?

👉 Three Coat Stucco Systems As its name suggests, three coat stucco is applied in three layers: 3/8-inch thick scratch coat, 3/8-inch thick brown coat, and approximate 1/8-inch thick finish coat.

❓ Does stucco need a drainage layer?

👉 Traditional stucco walls require a drainage mat to drain and dry water that infiltrates the wall system. Improperly installed or cracked stucco will allow moisture to penetrate a wall system, which can lead to extensive mold and rot in the supporting layers behind the stucco surface.

❓ What is the final step in the stucco process?

👉 The Finish Coat…. The final step in the process is the finish or top coat. This is applied with a hawk and trowel usually (depending on the finish) and can be customized a number of different ways using several different techniques. There are two main types of material used in stucco finishes, synthetic (or acrylic) stucco and traditional stucco.

❓ What is a stucco re-coat?

👉 A re-coat is a new finish coat (just the top layer of stucco, not the base coats) that is applied to the exterior of existing stucco to give it a new, fresh look. A re-coat will be more expensive than simply painting (short term) and is easier to do too. How Long Should I Wait To Paint My Stucco?

❓ How do you use a scratcher in stucco?

👉 The Scratch Coat…. After the cement is on the wall, a scratcher is used to make horizontal lines in the stucco mix, in order for the next coat (the brown coat) to stick to it. This process can take some time and patience, but is not too difficult to do, in fact it is the easiest process out of all of the base/finish coats.

❓ How do you apply stucco to netting and lath?

👉 Overlap the horizontal seams of the lath or netting by 1 inch and the vertical seams by 2 inches. Whether you're applying stucco in a two- or a three-coat system, you'll need two different types of stucco. The base coat formulation is suitable for undercoats, while a lighter finish coat formulation is best for the top coat.

Editoriale Video: HOW TO MARBLE PAINT - PIASSON


Menu